Please note that this website contains affiliate links. This means that if you click on a link and make a purchase, I may receive a small commission at no additional cost to you. This helps support the creation of free content on this site. Thank you for your support!

Create Your Own Layered Scuba Diver Scene

Jan 5, 2022by Viktoria Volk

Create Your Own Layered Scuba Diver Scene

Complete a beautiful scuba diving scene project in 18 steps.

Get the full design here

Difficulty Level: Medium

Size: Must be at least 8" x 8" (20cm x 20cm)

Tools & Materials

Checklist
Instructions Step 1: Cut layer 1 out of lightest blue* cardstock. *The colors are only suggestions!Create Your Own Layered Scuba Diver Scene
Step 2: Check that your first layer fits well into the frame before cutting the rest.Create Your Own Layered Scuba Diver Scene
 Step 3: Cut layer 2 out of blue* cardstock.Create Your Own Layered Scuba Diver Scene
Step 4: Apply adhesive to the back side of layer 2.                                                          Create Your Own Layered Scuba Diver Scene
Step 5: Stick layer 1 & 2 together like this.Create Your Own Layered Scuba Diver Scene
Step 6: Cut layer 5 out of light blue* cardstock.Create Your Own Layered Scuba Diver Scene
Step 7: Cut layer 4 out of emerald* cardstock.Create Your Own Layered Scuba Diver Scene
Step 8: Stick the foam pieces to the back side of layer 5.Create Your Own Layered Scuba Diver Scene
Step 9: Stick layer 5 & 4 together like this.Create Your Own Layered Scuba Diver Scene
Step 10: Cut layer 3 out of dark blue* cardstock.Create Your Own Layered Scuba Diver Scene
Step 11: Stick foam pieces on the back of layer 4.Create Your Own Layered Scuba Diver Scene
Step 12: Stick layer 4 on top of later 3 like this.Create Your Own Layered Scuba Diver Scene
Step 13: Stick foam squares on the back side of layer 3.Create Your Own Layered Scuba Diver Scene
Step 14: Stick layer 3 on top of layer 2 like this.Create Your Own Layered Scuba Diver Scene
Step 15: Place the completed piece inside the frame.Create Your Own Layered Scuba Diver Scene
Step 16: Cut all the extra pieces out of vinyl.Create Your Own Layered Scuba Diver Scene
Step 17: Stick the vinyl to transfer tape.Create Your Own Layered Scuba Diver Scene
Step 18: Transfer the vinyl designs on top of the glass. All done!Create Your Own Layered Scuba Diver Scene
Create Your Own Layered Scuba Diver Scene
Get the full design here
Back to The Shop

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.