Complete a beautiful scuba diving scene project in 18 steps. Get the full design here. Difficulty Level: Medium Size: Must be at least 8" x 8" (20cm x 20cm) Tools & Materials Checklist Shadow Box Frame (Optional) Foam paper Cutting Machine or Scissors Cutting Matt (Light Grip) Tweezers Scrapping Tool Adhesive for paper (I use double sided tape) Blue Cardstock Dark Blue Cardstock Light Blue Cardstock Lighter Blue Cardstock Emerald Cardstock White Vinyl Black Vinyl Silver Vinyl Light Blue Vinyl Blue Vinyl Directions Instructions Step 1: Cut layer 1 out of lightest blue* cardstock. *The colors are only suggestions! Step 2: Check that your first layer fits well into the frame before cutting the rest. Step 3: Cut layer 2 out of blue* cardstock. Step 4: Apply adhesive to the back side of layer 2. Step 5: Stick layer 1 & 2 together like this. Step 6: Cut layer 5 out of light blue* cardstock. Step 7: Cut layer 4 out of emerald* cardstock. Step 8: Stick the foam pieces to the back side of layer 5. Step 9: Stick layer 5 & 4 together like this. Step 10: Cut layer 3 out of dark blue* cardstock. Step 11: Stick foam pieces on the back of layer 4. Step 12: Stick layer 4 on top of later 3 like this. Step 13: Stick foam squares on the back side of layer 3. Step 14: Stick layer 3 on top of layer 2 like this. Step 15: Place the completed piece inside the frame. Step 16: Cut all the extra pieces out of vinyl. Step 17: Stick the vinyl to transfer tape. Step 18: Transfer the vinyl designs on top of the glass. All done! Get the full design here. Back to The Shop
Leave a comment