Create Your Own Layered Bear Forest Scene

by Viktoria Volk

 

 

Bear forest 3D shadow box project

 

Complete a pretty 3D scene of a bear in a forest in 18 steps.

Get the full design here

Difficulty Level: Medium

Size: Must be at least 8" x 10" (20cm x 25cm)

Tools & Materials

Checklist
InstructionsStep 1: Cut layer 1 out of dark brown cardstock and layer 2 out of bright green cardstock. The colors are only suggestions!Step 1 Cut layer 1 out of dark brown cardstock and 2 out of bright green cardstock
Step 2:

Stick foam strips to the back of layer 1 and cover the foam pieces with more adhesive.

Step 2 Stick foam strips to the back of layer 1 and cover the foam pieces with more adhesive.
 Step 3: Stick layer 1 on top of layer 2.
Step 3 Stick layer 1 on top of layer 2
Step 4: Cut layer 3 out of light green cardstock and set aside. Step 4 Cut layer 3 out of light green cardstock and set aside
Step 5: Stick foam strips to the back of layer 2 and cover the foam pieces with more adhesive.
Step 5 Stick foam strips to the back of layer 2 and cover the foam pieces with more adhesive.
Step 6: Place the back of layer 2 to the back of layer 3.Step 6 Place the back of layer 2 to the back of layer 3.
Step 7: Cut layer 4 out of bright green cardstock and set aside.Step 7 Cut layer 4 out of bright green cardstock and set aside.
Step 8: Stick foam strips to the back of layer 3 and cover the foam pieces with more adhesive.Step 8 Stick foam strips to the back of layer 3 and cover the foam pieces with more adhesive.
Step 9: Stick the back of layer 3 to the front of layer 4.Step 9 Stick the back of layer 3 to the front of layer 4.
Step 10: Cut layer 5 out of ivory cardstock and set aside.Step 10 Cut layer 5 out of ivory cardstock and set aside.
Step 11: Stick foam strips to the back of layer 4 and cover the foam pieces with more adhesive.
Step 11 Stick foam strips to the back of layer 4 and cover the foam pieces with more adhesive.
Step 12: Stick the front of layer 5 to the back of layer 4.Step 12 Stick the front of layer 5 to the back of layer 4.
Step 13: Cut layer 6 out of blue cardstock.Step 13 Cut layer 6 out of blue cardstock.
Step 14: Stick foam strips to the back of layer 5 and cover the foam pieces with more adhesive.Step 14 Stick foam strips to the back of layer 5 and cover the foam pieces with more adhesive.
Step 15: Stick the front of layer 6 to the back of layer 5.Step 15 Stick the front of layer 6 to the back of layer 5.
Step 16: Cut layer 7 out of white cardstock.Step 16 Cut layer 7 out of white cardstock.
Step 17: Stick foam strips to the back of layer 6 and cover the foam pieces with more adhesive.
Step 17 Stick foam strips to the back of layer 6 and cover the foam pieces with more adhesive.
Step 18: Step 18 Stick the back of layer 6 to layer 7. All done!Step 18 Stick the back of layer 6 to layer 7.
Bear in a Forest 3D layered cardstcok scene
Get the full design here
Back to The Shop

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.